Configuring the Printer Drivers
Be sure to properly configure the printer driver for your printer and its installed options,
such as additional media trays, the hard disk drive, duplex module, etc. If the printer
driver is not properly configured, the optional features, such as 2-Sided Printing, Proof
Printing, Secure Printing, Tray 2 and 3 sources, etc., will not be available.
Printing a configuration sheet:
On the printer's front panel, press the Menu Up
1
Menus
Print Menu
2
Press the Item Up or Item Down buttons until you see:
Print Menu
Config Sheet
3
Press the Enter button to print the page.
4
At your computer, go to the printer settings. Open the printer driver dialog and click the Printer
Configuration tab. (This procedure will differ slightly with different operating systems.)
5
Enable (check) the items in the driver dialog that are listed on the printed Configuration page.
6
Click OK to close the printer driver dialog.
†
Note that the buttons have graphics and numbers only (no written labels) on the 220 V models
of the printer. Please see
Advanced Features and Troubleshooting Manual
Front Panel Layout
on page 39 for button numbers and graphics.
†
or Menu Down until you see:
Printing
25