Printer Features; Media Handling - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Printer Features

Your printer has many special features that enable you to achieve the results you need for
your specific print job. Features vary according to the options installed on your printer.
This section will help you become familiar with your printer's features and capabilities.

Media Handling

Your printer has several media input sources and output destinations as described below.
Input Sources
The standard Multi-Sheet Bypass Feeder (MBF)
I
2
75 g/m (20 lb. bond) paper (up to 50 transparency sheets or a smaller number of
sheets of special media).
Tray 1 is the standard input tray that holds up to 550 sheets of 75 g/m
I
paper or 250 standard or 200 premium transparencies.
Trays 2-5 are the optional input trays installed below Tray 1. They hold up to
I
550 sheets of 75 g/m
the thickness of the paper. Transparencies and glossy paper are not supported from
these trays.
Trays 1, 2, 3, 4 and 5 all have paper-size sensing, low-paper sensing, and tray-empty
sensing. Paper levels are indicated on a gauge visible at the front of the tray. When the
level reaches approximately 40 sheets, the front panel displays the low paper warning.
The Multi-Sheet Bypass Feeder (MBF) has tray-empty sensing but not paper-size sensing.
Refer to Selecting Print Media on page 12 for information on supported media.
Output Destinations
The top output tray holds up to 500 sheets of 75 g/m
I
face-down. It has tray-full detection.
The side output tray holds up to 100 sheets of 75 g/m
I
receives prints face up (at the left hand side of the printer).
Advanced Features and Troubleshooting Manual
2
(20 lb. bond) paper. The capacity of these trays varies based on
Printer Features
holds up to 100 sheets of standard
2
2
(20 lb. bond) and receives prints
2
(20 lb. bond) paper and
(20 lb. bond)
7