Xerox phaser 2135 Advanced Features And Troubleshooting Manual page 104

Printer Management Status Messages (cont'd.)
U8- Engine PU Fan Error
U9-Supply Fan Error
U12-Duplex I/F Error
U13-Tray 3 I/F Error
U14-Tray 2 I/F Error
U15-Control Panel Error
U16-Tray 4 I/F Error
U17-Tray 5 I/F Error
Advanced Features and Troubleshooting Manual
Fault An error has been detected with a cooling fan.
Turn off the printer, wait 15 seconds, then turn on
the printer. If the problem persists, check the
support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the power supply
cooling fan. Turn off the printer, wait 15 seconds,
then turn on the printer. If the problem persists,
check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the duplex
module interface and communication path. Make
sure the Auto Duplex Unit is properly installed. If
the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the Tray 3
interface and communication path. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the Tray 2
interface and communication path. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the front panel
interface and communication path. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Fault An error has been detected with the Tray 4
interface and communication path. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
An error has been detected with the Tray 5
interface and communication path. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at:
www.xerox.com/officeprinting/infoSMART.
Troubleshooting
91