Installing The Printer Drivers; Configuring The Printer Drivers - Xerox N2025/N2825 User Manual

Installing the
Printer Drivers
Configuring the
Printer Drivers
Table 3.2 PostScript Printer Drivers
Environment
Windows
IBM OS/2
Macintosh
UNIX
(Sun Solaris, Sun OS,
SCO UNIX, IBM AIX,
HP-UX, DEC)
1
For Windows 3.1, use a generic driver, or obtain a driver from your
customer support center. Note that certain features will not be available in
Windows 3.1
Inside the cover of the product CD's case is a booklet with
instructions on how to load your printer drivers. In
addition, your System Administrator can download
drivers directly to your workstation.
When you initially use any of your printer drivers, make
sure to properly configure them for the printer and its
installed options (such as the hard drive, High Capacity
Feeder, etc.). These settings are displayed under the
driver's "Printer Configuration" tab. If you are not certain
which options your printer will support, you can check by
printing a Configuration Sheet at the printer's Control
Panel, as described in the section "Generating a
Printer Report" (page 3-57).
Using the Printer Drivers
1
Printer Driver
Windows 95/98
Windows 2000
Windows NT 4.0
OS/2 Ver. 2.1
OS/2 WARP
System 7.x, 8.x
Sun Solaris 2.5, 2.5.1, 2.6
IBM AIX 4.2.x, 4.3.x
HP-UX 10.x, 11.x
SGI 6.2, 6.4
DEC 4.0
UNIXWare 7.0
Chapter 3: Printing 3-5