Maintenance - Oce Arizona 550 GT User Manual

Fill the Coolant Reservoir
Attention:
When the coolant level is below the center of the sight-window the printer software will
display a warning and shut down any print jobs. Make sure that you keep the coolant
level near the top at all times to avoid stopping in the middle of a print job.
Illustration
[183] Fill the Coolant Reservoir
Fill the Coolant Reservoir
Remove the cap from the coolant reservoir located next to the green beacon light on top
1.
of the carriage.
Open the container of coolant fluid.
2.
Insert the syringe into the fluid and draw back the plunger until the syringe is almost full.
3.
Insert the hose into the coolant reservoir.
4.
240 Chapter 12 - Printer Maintenance
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012