Uv Ink And Flush - Oce Arizona 550 GT User Manual

UV Ink and Flush

UV Ink and Flush
Introduction
The safety concerns involved with the handling and use of the UV ink and Flush are de-
tailed in the Material Safety Data Sheet (MSDS) documents. Review them before handling
any UV ink or flush.
Note:
The MSDS for all UV inks and Flush are available from the corporate Océ Global E-
Marketing (GEM) website. For the latest MSDS and PSDS, visit:
http://global.oce.com/support/
Caution:
UV inks can be harmful if not properly handled. Follow the MSDS guidelines carefully
in order to ensure maximum safety.
Personal Safety
The operator must wear nitrile gloves, a protective apron, and safety glasses with side
shields when handling inks. Read and practice safety guidelines as outlined in the MSDS
for each ink. Post these documents in the work area as required by prevailing law. MSDS
are provided with all inks and flush when you purchase them.
Print Height Warning
Avoid printing at a height greater than recommended as this causes excessive emmsisions
of UV light and ink mist. Always measure the thickness of the media in use and set the
carriage height correctly for that media.
Disposal of UV Ink
All waste containing uncured or partly cured UV ink is hazardous and must be disposed
of separately according to local regulations. Do not mix ink waste with non-hazardous
waste (household, office, etc.). Do not allow it to reach sewage systems or drinking water
supplies. Ink waste includes maintenance pads and cloths, gloves and any other material
containing uncured or partly cured UV ink.
Disposal must be made according to official local regulations.
20 Chapter 3 - Safety Information
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012