Safety Awareness - Oce Arizona 550 GT User Manual

Safety Awareness

Safety Awareness
Introduction
This section contains two sets of principles that must be followed to assure maximum
safety when operating your Océ Arizona printer. The first set uses negative examples to
show you things to avoid in order to prevent injury to the operator. The second set of
principles illustrates some of the residual risks that are inherent in the operation of the
printer. These are situations or physical aspects of the printer that may present a potential
danger to the operator, but would compromise the capabilities of the printer if changed.
Therefore, they are pointed out as a precaution the operator must be aware of when using
the printer.
Attention:
The photos in the following table illustrate situations that must be avoided when operating
your printer.
Situations and Actions to Avoid
How NOT to use the printer
Avoid these Situations For Your Personal Safety
[22] Keep the table clear
28 Chapter 3 - Safety Information
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012
#
Do not place your
hand in the carriage
pathway when printer
power is on. Do not
leave any objects on
the table printing sur-
face, except for media
that you will print on.
Also make sure the
media is 48 mm (1.89
inches) or less in
thickness.