Oce Arizona 550 GT User Manual page 118

How to Load Media
A: Load Supply Media Roll On a Media Shaft
Place an empty media shaft on a suitable flat work area, positioned as shown, so that the
1.
5mm hex key is inserted on the right side of the shaft to lock and unlock the core locks.
[79] Unlock the Media Shaft Core Locks
To unlock the media shaft core locks (1) turn counter-clockwise with the supplied 5mm
2.
hex key (2).
Slide a new roll of media onto the supply shaft.
3.
Roughly center the roll on the shaft, and then insert the shaft into the Supply (bottom)
4.
position on the printer. Insert one end of the shaft at a time.
Note:
Load the shaft with the core lock and coupler end on the right side of the printer.
118 Chapter 7 - How to Operate the Roll Media Option
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012