Maintenance; How To Change Ink - Oce Arizona 550 GT User Manual

User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012
Note:
The ink system is under pressure and so it is possible that some ink may spray out at first.
Keep the cloth wrapped around the end of the bleed tube so that any ink spay is contained.
Pull the target ink filter out of its metal retainer clip.
8.
Unscrew the bleed tube cap from the old filter and thread it into the top connector of
9.
the new filter. Place the cap that came with the new filter on the old filter to prevent ink
from leaking out of the old filter.
Repeat the previous step for the top and bottom connections.
10.
Note:
Wipe off any spilled ink.
Insert the new filter into the empty retainer clip and make sure the flow arrow on the
11.
filter points downward. Be careful not to pinch the ink lines.
Proceed to How to Bleed an Ink Filter.
12.
How to Bleed an Ink Filter
Open the ink purge valve of the target color to bleed and make sure the valves of the three
1.
(or four) other colors are closed.
[191] Yellow Purge Valve Open
Click on the ink status icon located in the top right corner of the Print Job Control screen
2.
of the printer software to monitor the ink status.
How to Change Ink Filters
Chapter 12 - Printer Maintenance 249