Empty The Ink Waste; Maintenance - Oce Arizona 550 GT User Manual

Empty the Ink Waste Tray
Place a suitable empty container that holds at least 2 liters under the waste tray drain
2.
valve.
[182] Empty Waste Tray
Note:
Use only type 2, 4, and 5 plastic containers (LDPE, HDPE or PP) as the UV ink will
attack other kinds of plastic and this can result in an ink spill.
Turn the valve on the waste tray until it starts to drain the waste material.
3.
Shut off the valve when ink waste no longer drains out (or if the container become full).
4.
Note:
Use a piece of cloth or paper to wipe the valve clean as some ink can remain inside and
drip out later when the printer is in motion.
Warning: All waste containing uncured or partly cured UV ink is hazardous and must
be disposed of separately according to local regulations. Do not mix ink waste with non-
hazardous waste (household, office, etc.). Do not allow it to reach sewage systems or
drinking water supplies. Ink waste includes maintenance pads and cloths, gloves and any
other material containing uncured or partly cured ink.
Dispose of the waste material in a suitable, environmentally-friendly manner.
5.
238 Chapter 12 - Printer Maintenance
User Manual: Arizona 550 GT - Version 1.2, Revision B - 2012