Table of Contents
Advertisement
Chapter 4: SuperScript Console
Use the list bar to highlight the print mode you want to
use. To use the selected printer as a default, click on Set
As Default. You can also request current printer status
information by clicking on Local Printer Status..
At the bottom of the Control Panel window the printer
information section shows the picture and information
of the currently selected printer in each mode (GDI,
PCL). You can also select a printer by clicking one of
the two parts.
If you did not install PCL, the PCL Printer selection
will be grayed out and cannot be selected. If you want
to install PCL, you must do a Custom Installation
using the CD.
GDI Setup Window
With the printer selected in GDI mode, when you click
the printer setup button (the sixth button in the row) in
the Control Panel, the GDI setup window appears.
4—4
05 Ch.4 Console
4
Paper
When you select Paper from the top of the GDI Setup
screen you can select the following:
• Paper Source: Hopper
Manual Feed
Second Hopper
• Orientation:
Portrait
Landscape
• Paper Size:
Letter
Legal
A4
B5
Executive
Envelope Monarch
Envelope #10
Envelope DL
Envelope C5
• Number of copies:
• Scaling:
96.9.24, 11:57 AM
8-
⁄
x 11 in.
1
2
8-
1
⁄
x 14 in.
2
210 x 297 mm
182 x 257 mm
7-
⁄
x 10-
⁄
in.
1
1
4
2
3-
7
⁄
x 7-
1
⁄
in.
8
2
4-
⁄
x 9-
⁄
in.
1
1
8
2
110 x 220 mm
162 x 229 mm
1 up to 99
10% to 200%
Advertisement
Table of Contents
