The Toner Module - NEC SuperScript 660plus User Manual

Installing the Photoconductor Module and

the Toner Module

Installing the photoconductor module and toner
module as follows:
1. Press the top cover release button, and swing the
top cover open completely.
2. Unpack the photoconductor module from its
carton.
Caution! Whenever the photoconductor module is
removed from the printer be sure to cover it with a
cloth to prevent exposure to light.
03 Ch.2 Setting Up 11
Chapter 2: Setting Up and Using the Printer
3. Install the photoconductor in the printer, aligning
the guides with the slits inside the printer frame.
Press it down firmly.
Hold the photoconductor so that you see the L (left)
and R (right) markers on it, indicating how you hold it.
Right
96.9.24, 11:09 AM
Left
2—11