Table of Contents
Advertisement
Chapter 2: Setting Up and Using the Printer
Loading the Manual Feeder
1.
With the side to be printed facing up, press the
edge of the paper against the left side in the
manual feeding slot.
2.
Insert one sheet of paper until it stops.
Insert only one sheet of paper or one envelope into
2—10
03 Ch.2 Setting Up
10
the slot at a time. Insert envelopes face up with the
narrow end first, and the flap to the right. Refer to
the paper path sticker in the accessory kit for a
small diagram showing you how to insert paper
and envelopes.
Duplex Printing
When printing on both sides of the paper (manually),
observe the following:
•
Papers are not fed from the main feeder tray. Use
the manual feeder slot instead.
•
Be sure the temperature is between 59°F to 77° F
(15° to 25°C) and the humidity is between 20 to 70%
•
Be sure the image density of the text on the first
printed side does not exceed a black to white ratio
of 5%.
•
Use paper 24 lbs. or heavier.
•
Use paper right after being unwrapped.
96.9.24, 11:08 AM
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperScript 660plus and is the answer not in the manual?
Questions and answers