Table of Contents
Advertisement
Chapter 2: Setting Up and Using the Printer
Some Dos and Donts for Using the Printer
To ensure the optimum performance of the printer,
follow these precautions and admonitions:
•
NEVER open any door, or turn the printer OFF
while it is printing.
•
NEVER bring any magnetized object, flammable
gas, or liquid near the printer.
•
When unplugging the power cord, do not pull on
the cord; rather, hold the plug and pull it out. A
damaged cord could result in a fire or cause an
electrical shock.
•
NEVER attempt to unplug the power cord with a
wet or damp hand, as it could cause an electrical
shock.
•
ALWAYS unplug the power cord when attempting
to move the printer. Moving the printer with the
power cord plugged in can damage the cord, and
result in a fire, or cause an electrical shock.
•
ALWAYS unplug the power cord when you will
not be using the printer for a long time.
•
NEVER remove any panel or cover that is secured.
The printer contains a high-voltage component
inside, which can cause an electrical shock.
•
NEVER place a heavy object on the power cord, or
pull or bend the cord, as a fire or electrical shock
could result.
•
ALWAYS be sure that the printer does not ride on
the power cord or communications cable of any
other electrical equipment, and it does not get such
a cord or cable wedged into its own mechanism, as
2—14
03 Ch.2 Setting Up
14
a malfunction or fire could result.
•
NEVER drop paper clips, staples, or other small
pieces of metal through the vents or other printer
openings, as a fire or electrical shock could result.
•
NEVER place a vase or vessel containing water on
the printer. If fluid gets inside it can cause a fire or
electrical shock.
•
In case a piece of metal or fluid gets inside the
printer, turn it OFF immediately, unplug the power
cord, and call your NEC Technical Support at:
1-800-632-4560
A fire or electrical shock could result if the printer is
run without taking the necessary action.
•
NEVER leave the printer running when it becomes
very hot or emits smoke, an unusual smell, or
noise. If that happens, immediately turn the
printer OFF, unplug it, and call your NEC
Technical Support at 1-800-632-4650. A fire or
electrical shock could result if you run the printer
without taking the necessary action.
Note: Locate the printer in a well ventilated room. A
negligible amount of ozone is generated during
normal operation of this printer. An unpleasant odor
may be created in poorly ventilated rooms during
extensive printer operations. For a comfortable,
healthy, and safe operating environment, it is
recommended that the room be well ventilated.
96.9.24, 11:11 AM
Advertisement
Table of Contents
Need help?
Do you have a question about the SuperScript 660plus and is the answer not in the manual?
Questions and answers