Table of Contents
Advertisement
Chapter 2: Setting Up and Using the Printer
Installing the Main (Multipurpose) Feeder Tray
Referring to the figure of the external printer parts,
attach the multipurpose tray as follows:
1. Hold the multipurpose tray with both hands.
2. Carefully set the tray into the printer at an upward
angle.
3. Once the tray is completely inserted, gently press
down to lock the tray into place. Be sure it is
pressed down fully.
Loading Paper
A maximum of 150 sheets (17 lb. paper) can be loaded
into the tray at once.
1. Pull out the extension piece of the multipurpose
tray.
Pull out the larger extension guide q, then fold out
the smaller extension guide w for paper out tray.
2—8
03 Ch.2 Setting Up
8
Raise the stopper e when using a letter-size or A4
size paper.
2. Load a stack of paper evenly into multipurpose
tray. Adjust the paper guide to fit snugly against
side of the paper:
96.9.24, 11:08 AM
Advertisement
Table of Contents
