Table of Contents
Advertisement
Local Queue
The Local Queue is used to review the status of your
queued print jobs.
The local queue shows
•
the print job name
•
the format of the print job (GDI, PCL)
•
the size in bytes of the print job
•
the time the job was sent to the queue
•
the owner of the print job
05 Ch.4 Console
7
Chapter 4: SuperScript Console
Note: If the print job is in GDI without the NEC
SuperScript Print Manager active, the job is not listed
in the Local Queue. (Refer to the section on the GDI
Setup Window in this chapter.) The job will be listed
in the standard Windows printer queue.
If you double-click an entry in the job queue, a Print
Job Information dialog pops up to show you more
information about the job.
You can use drag-and-drop for jobs that have not yet
started printing. This allows you to rearrange the order
of your print jobs.To drag-and-drop, follow these steps:
1. Move the cursor to the entry you want to move.
2. Press the left mouse button. Do not lift your finger.
The entry will turn blue indicating that it has been
selected.
96.9.24, 0:00 PM
4—7
Advertisement
Table of Contents
