Gateway 7400 System Manual page 84

8
Install the new control panel board by placing the mounting slots of the
control panel board on the tabs on the front of the chassis, then slide
the board down until it locks into place. Make sure the front panel cable
is out of the way as you install the board.
9
Replace the screw you removed in Step 4.
10
Plug the control panel cable into the connector on the control panel
board.
11
Replace the bezel. (See "Replacing the bezel" on page 28.)
12
Close the case. (See "Closing the case" on page 27.)
13
Reconnect the power cord, the modem cord, and all other peripherals,
then turn on the system.
76
Replacing and Adding System Components