Gateway 7400 System Manual page 45

11
Align the rails with the open drive bay, then slide the drive into the bay
until the locking tabs snap into place (make sure that the data and power
connectors on the drive face the inside of the server).
12
Connect the power and data cables to the drive. (See the drive
documentation for proper cable orientation.)
13
Replace the bezel. (See "Replacing the bezel" on page 28.)
14
Close the case. (See "Closing the case" on page 27.)
15
Reconnect the power cord, the modem cord, and all other external
peripheral devices, then turn on the system.
37
Drives