Gateway 7400 System Manual page 107

Gateway server user manual
Hide thumbs Also See for 7400:
Table of Contents

Advertisement

Mechanical lock and monitoring
The system includes an intrusion switch. When the bezel is removed, the
switch transmits an alarm signal to the server, where server management
software processes the signal.
Software locks through the BIOS Setup utility
The Security tab in the BIOS Setup utility (see "About the BIOS Setup utility"
on page 85) provides several security features to prevent unauthorized access
to the system. Once the security measures are enabled, access to the system
is allowed only after you enter the correct password(s). For example, the
security features let you:
Set and enable supervisor and user passwords.
Set user BIOS setup access level (full, limited, view only, or no access).
Set Password Check for
Enable Unattended Start mode which, when enabled, allows the host
system to complete the boot process without a password, yet causes the
keyboard and mouse to remain locked until the user password is enabled.
Using passwords
If you set and enable a user password but not a supervisor password, enter
the user password to boot the system with unlimited BIOS Setup access.
If you set and enable both a user and a supervisor password:
Enter either one to boot the server and enable the keyboard and mouse.
Enter the supervisor password for full access the BIOS Setup to change
the system configuration.
Changing passwords
To change or delete an existing user password, restart the system and press
F1 to enter the BIOS Setup utility, then enter the password when the system
asks for it during the POST routine. To change the password, select
User Password
password.
To change or delete an existing supervisor password, restart the system and
press F1 to enter the BIOS Setup utility, then enter the supervisor password
(not the user password) when the system asks for the password during the
POST routine. To change the supervisor password, select
from the
Password
setup only
from the
menu, then enter and confirm the new
Security
menu, then enter and confirm the new password.
Security
or
.
always
System administration and control
Change
Change Supervisor
99

Advertisement

Table of Contents
loading

Table of Contents

Save PDF