Gateway 7400 System Manual page 80

10
Place the new power supply in the proper position in the chassis and line
up the mounting holes with the holes in the chassis.
11
Replace the screws securing the power supply to the back panel.
12
Reconnect the power connectors to the system board and to all internal
devices.
13
Replace the bezel. (See "Replacing the bezel" on page 28.)
14
Close the case. (See "Closing the case" on page 27.)
15
Reconnect the power cord, the modem cord, and all external peripherals,
then turn on the system.
72
Replacing and Adding System Components
Handle