Rip; Chapter 19 Rip; Overview; What You Can Do - ZyXEL Communications NBG-419N v2 User Manual

19.1 Overview

Routing Information Protocol (RIP) is an interior or intra-domain routing protocol that uses
distance-vector routing algorithms. RIP is used on the Internet and is common in the NetWare
environment as a method for exchanging routing information between routers.

19.2 What You Can Do

Use the RIP screen
protocols.

19.3 RIP Screen

Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast protocols. Click Network >
RIP. The screen appears as shown.
Figure 106 Network > RIP
The following table describes the labels in this screen.
Table 68 Network > RIP
LABEL

RIP

Apply
Reset
NBG-419N v2 User's Guide
(Section 19.3 on page 151) to enable RIPv1 or RIPv2, which are LAN broadcast
DESCRIPTION
Select the RIPv1 or RIPv2 you want the Router to use.
Otherwise select None.
Click Apply to save your changes back to the Router.
Click Reset to begin configuring this screen afresh.
C
HAPTER
1 9
RIP
151