Lan Ip Screen; Ip Alias Screen - ZyXEL Communications NBG-419N v2 User Manual

14.4 LAN IP Screen

Use this screen to change the IP address for your Router. Click Network > LAN > IP.
Figure 94 Network > LAN > IP
The following table describes the labels in this screen.
Table 59 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset

14.5 IP Alias Screen

Use this screen to have the Router apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 95 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 60 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
NBG-419N v2 User's Guide
DESCRIPTION
Type the IP address of your Router in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your Router will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the Router.
Click Apply to save your changes back to the Router.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Check this to enable IP alias.
Type the IP alias address of your Router in dotted decimal notation.
Chapter 14 LAN
133