Firmware Upgrade Screen - ZyXEL Communications NBG-419N v2 User Manual

Chapter 25 Maintenance
Table 81 Maintenance > Time (continued)
LABEL
Get from Time
Server
Auto
User Defined Time
Server Address
Time Zone Setup
Time Zone
Daylight Savings
Start Date
End Date
Apply
Cancel

25.6 Firmware Upgrade Screen

Find firmware at
extension, e.g., "Router.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may
take up to two minutes. After a successful upload, the system will reboot.
182
DESCRIPTION
Select this radio button to have the Router get the time and date from the time server
you specified below.
Select Auto to have the Router automatically search for an available time server and
synchronize the date and time with the time server after you click Apply.
Select User Defined Time Server Address and enter the IP address or URL (up to 20
extended ASCII characters in length) of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Configure the day and time when Daylight Saving Time starts if you selected Daylight
Savings. The o'clock field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the first Sunday of
April. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select First, Sunday, April and type 2 in
the o'clock field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the
time zones in the European Union start using Daylight Saving Time at the same moment
(1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March.
The time you type in the o'clock field depends on your time zone. In Germany for
instance, you would type 2 because Germany's time zone is one hour ahead of GMT or
UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you selected Daylight
Savings. The o'clock field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the
United States you would select Last, Sunday, October and type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment
(1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday,
October. The time you type in the o'clock field depends on your time zone. In Germany
for instance, you would type 2 because Germany's time zone is one hour ahead of GMT or
UTC (GMT+1).
Click Apply to save your changes back to the Router.
Click Cancel to begin configuring this screen afresh.
www.zyxel.com in a file that (usually) uses the system model name with a "*.bin"
NBG-419N v2 User's Guide