Wps Screen - ZyXEL Communications NBG-419N v2 User Manual

Chapter 12 Wireless LAN

12.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Figure 80 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 49 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel
112
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
This displays Configured when the Router has connected to a wireless network using
WPS or when Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the Router or you click Release_Configuration to remove the
configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the Router.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
Router.
This is the name of the wireless network.
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the Router.
Click Cancel to reload the previous configuration for this screen.
NBG-419N v2 User's Guide