ZyXEL Communications NBG-419N v2 User Manual page 73

Table 32 Status Screen: Access Point Mode (continued)
LABEL
- WLAN OP Mode
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Configuration Mode
Interface Status
Interface
Status
Rate
Summary
Packet Statistics
WLAN Station Status
NBG-419N v2 User's Guide
DESCRIPTION
This is the device mode (Section 6.1.2 on page
- Access Point Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON or OFF.
This shows a descriptive name used to identify the Router in the wireless LAN.
This shows the channel number which you select manually.
This shows the channel number which the Router is currently using over the wireless LAN.
This shows the level of wireless security the Router is using.
This shows the wireless standard.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
This column shows the type of data the Router is recording.
This column shows the actual data recorded by the Router.
This is the total time the Router has been on.
This field displays your Router's present date and time.
This displays what percentage of the Router's processing ability is currently used. When this
percentage is close to 100%, the Router is running at full load, and the throughput is not
going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the Router is using.
This shows the web configurator mode you are viewing - Expert.
This displays the Router port types. The port types are: LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping
a call) if you're using PPPoE or PPTP encapsulation. This field displays N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN Station Status screen
47). Use this screen to view the wireless stations that are currently associated to the Router.
Chapter 9 Access Point Mode
49) to which the Router's wireless LAN is set
(Section 5.6 on page
(Section 5.7 on page
46).
73