Status Screen In Easy Mode - ZyXEL Communications NBG-419N v2 User Manual

7.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the Router.
Figure 43 Status Screen in Easy Mode
The following table describes the labels in this screen.
Table 28 Status Screen in Easy Mode
ITEM
Name
Time
WAN IP
MAC Address
Firmware
Version
Wireless
Network Name
Security
NBG-419N v2 User's Guide
DESCRIPTION
This is the name of the Router in the network. You can change this in the Maintenance >
General screen in Section 25.3 on page
This is the current system date and time.
The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in HH:MM:SS
(Hour:Minutes:Seconds) format.
This is the IP address of the WAN port.
This is the MAC address of the Router.
This shows the firmware version of the Router.
The firmware version format shows the trunk version, model code and release number.
This shows the SSID of the wireless network. You can configure this in the Wireless Security
screen (Section 7.6.6 on page
This shows the wireless security used by the Router.
179.
58; Section 12.3.1.1 on page
Chapter 7 Easy Mode
102).
61