Advanced Screen - ZyXEL Communications NBG-419N v2 User Manual
Wireless n netusb router
Hide thumbs
Also See for NBG-419N v2:
- Quick start manual (2 pages) ,
- Brochure & specs (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Chapter 15 DHCP Server
Table 61 Network > DHCP Server > General (continued)
LABEL
Pool Size
Apply
Reset
15.4 Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
Router sends to the DHCP clients.
To change your Router's static DHCP settings, click Network > DHCP Server > Advanced. The
following screen displays.
Figure 97 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Table 62 Network > DHCP Server > Advanced
LABEL
LAN Static DHCP Table
#
MAC Address
136
DESCRIPTION
This field specifies the size, or count of the IP address pool for LAN.
Click Apply to save your changes back to the Router.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row).
Type the MAC address (with colons) of a computer on your LAN.
NBG-419N v2 User's Guide
Advertisement
Table of Contents
Troubleshooting
