Chapter 10 WISP Mode
Note: After clicking Login, the Easy mode appears. Refer to
Easy mode screens. Click Expert mode to see the screens described in the sections
following this.
10.4 WISP Mode Status Screen
Click
to open the status screen.
Figure 56 Status: WISP Mode
The following table describes the labels shown in the Status screen.
Table 34 Status Screen: WISP Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
WAN Information
78
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the firmware version and the date created.
This is the device mode
(Section 6.1.2 on page
Section on page 51
49) to which the Router is set - WISP Mode.
NBG-419N v2 User's Guide
for the