ZyXEL Communications NBG-419N v2 User Manual page 81

10.5.0.1 No Security
Use this screen if the access point to which you want to connect does not use encryption.
Figure 58 No Security (WISP)
The following table describes the labels in this screen.
Table 36 No Security (WISP)
LABEL
Wireless Setup
Network Name
(SSID)
Security
Security Mode
Apply
Cancel
NBG-419N v2 User's Guide
DESCRIPTION
Enter the name of the access point to which you are connecting.
Select No Security in this field.
Click Apply to save your changes back to the Router.
Click Cancel to reload the previous configuration for this screen.
Chapter 10 WISP Mode
81