Advance Screen - ZyXEL Communications NBG-419N v2 User Manual

Chapter 10 WISP Mode

10.5.3 Advance Screen

Use this screen to enable the power saving mode of your Router. Go to Configuration > Wireless
LAN to open the following screen.
Figure 61 Configuration > Wireless LAN > Advance Screen (WISP)
The following table describes the labels in this screen.
Table 39 Configuration > Wireless LAN > Advance Screen (WISP)
LABEL
Power Saving
Mode
RTS Threshold
Fragment
Threshold
Apply
Cancel
84
DESCRIPTION
Select CAM (Constantly Awake Mode) if you do not want your Router to go to "sleep"
when no wireless activity is detected in the Wireless LAN.
Select Power Saving Mode if you want the Router to go to sleep when no wireless
connection is needed for a period of time. This means the Router consumes less electrical
power.
This is the maximum data fragment size that can be sent in a wireless network before the
AP fragments the packet into smaller data frames.
This value controls how often wireless clients must get permission to send information to
the AP. The lower the value, the more often the wireless clients must get permission. If this
value is greater than the fragmentation threshold value, then wireless clients never have to
get permission to send information to the AP.
Click Apply to save your changes back to the Router.
Click Cancel to reload the previous configuration for this screen.
NBG-419N v2 User's Guide