The Zyxel Netusb Share Center Utility - ZyXEL Communications NBG-419N v2 User Manual

Note: The following operating systems are supported: Windows XP/Vista/7 (32 and 64-bit
versions), and Mac OS X 10.6.
To open the ZyXEL NetUSB Share Center Utility, double-click its system tray icon.
3

2.2 The ZyXEL NetUSB Share Center Utility

This section describes the ZyXEL NetUSB Share Center Utility main window.
Figure 3 ZyXEL NetUSB Share Center Utility Main Window
The following table describes the icons in this window.
Table 3 ZyXEL NetUSB Share Center Utility Main Window Icons
ICON
NBG-419N v2 User's Guide
DESCRIPTION
Configure Server
Click to open the Router's built-in Web Configurator, which you can use to set up the Router
(see Chapter 4 on page 37 for details).
Auto-Connect Printer
You can set the selected printer to 'auto-connect' after you have connected it to your
computer during inital connection. If the printer is auto-connected to your computer, they
will always be connected over the network. You do not need to configure it manually each
time.
Note: If the computer is connecting to the shared USB printer for the first time, you need to
click Connect and setup the printer before you can use the Auto-Connect Printer
function. See Chapter 11 on page 87
Note: You first must install the appropriate drivers for the printer that you intend to use.
for more details.
21