Router Access And Login - ZyXEL Communications NBG-419N v2 User Manual

Chapter 26 Troubleshooting

26.2 Router Access and Login

I don't know the IP address of my Router.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the Router by
2
looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the Router (it depends on the network), so enter this IP
address in your Internet browser.Set your device to Router Mode, login (see the Quick Start Guide
for instructions) and go to the Device Information table in the Status screen. Your Router's IP
address is available in the Device Information table.
• If the DHCP setting under LAN information is None, your device has a fixed IP address.
• If the DHCP setting under LAN information is Client, then your device receives an IP
address from a DHCP server on the network.
If your Router is a DHCP client, you can find your IP address from the DHCP server. This information
3
is only available from the DHCP server which allocates IP addresses on your network. Find this
information directly from the DHCP server or contact your system administrator for more
information.
Reset your Router to change all settings back to their default. This means your current settings are
4
lost. See Section 26.4 on page 193
Router.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
193.
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
don't know the IP address of my Router.
190
in the Troubleshooting for information on resetting your
(Section 14.4 on page 133), use the new IP address.
Section 26.4 on page
I
NBG-419N v2 User's Guide