Rule Configuration: Application Rule Configuration - ZyXEL Communications NBG-419N v2 User Manual

Chapter 22 Bandwidth Management
Table 73 Management > Bandwidth Management > Advanced (continued)
LABEL
#
Priority
Category
Service
Advanced
Setting
User-defined
Service
#
Enable
Direction
Service Name
Category
Modify
Apply
Reset

22.5.1 Rule Configuration: Application Rule Configuration

If you want to edit a bandwidth management rule for a pre-defined service or application, click the
Edit icon in the Application List table of the Advanced screen. The following screen displays.
Figure 114 Bandwidth Management Rule Configuration: Application List
164
DESCRIPTION
This is the number of an individual bandwidth management rule.
Select a priority from the drop down list box. Choose High, Mid or Low.
• High - Select this for voice traffic or video that is especially sensitive to jitter (jitter is
the variations in delay).
• Mid - Select this for "excellent effort" or better than best effort and would include
important business traffic that can tolerate some delay.
• Low - Select this for non-critical "background" traffic such as bulk transfers that are
allowed but that should not affect other applications and users.
This is the category where a service belongs.
This is the name of the service.
Select the check box to have the Router apply this bandwidth management rule.
Click the Edit icon to open the Rule Configuration screen where you can modify the rule.
Use this table to allocate specific amounts of bandwidth to specific applications or services
you specify.
This is the number of an individual bandwidth management rule.
Select this check box to have the Router apply this bandwidth management rule.
Select LAN to apply bandwidth management to traffic from WAN to LAN.
Select WAN to apply bandwidth management to traffic from LAN/WLAN to WAN.
Select WLAN to apply bandwidth management to traffic from WAN to WLAN.
Enter a descriptive name for the bandwidth management rule.
This is the category where a service belongs.
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule or
create a new rule in the Rule Configuration screen. See
more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
Section 22.5.2 on page 165
NBG-419N v2 User's Guide
for