Chapter 22 Bandwidth Management
22.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the Upstream Bandwidth that you configure in the Bandwidth
Management Advanced screen
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth
Management Advanced screen
22.4 General Screen
Use this screen to have the Router apply bandwidth management.
Click Management > Bandwidth Management to open the bandwidth management General
screen.
Figure 112 Management > Bandwidth Management > General
The following table describes the labels in this screen.
Table 72 Management > Bandwidth Management > General
LABEL
Enable
Bandwidth
Management
Apply
Reset
22.5 Advanced Screen
Use this screen to configure bandwidth management rules for the pre-defined services or
applications.
You can also use this screen to configure bandwidth management rule for other services or
applications that are not on the pre-defined list of Router. Additionally, you can define the source
and destination IP addresses and port for a service or application.
162
(Section 22.5 on page
Section 22.5 on page
DESCRIPTION
This field allows you to have Router apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule priority over
traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or minimum
amounts of bandwidth that can be used by traffic that matches a bandwidth rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
162).
162.
NBG-419N v2 User's Guide