ZyXEL Communications NBG-419N v2 User Manual page 122

Chapter 13 WAN
This screen displays when you select PPPoE encapsulation.
Figure 87 Network > WAN > Internet Connection: PPPoE Encapsulation
The following table describes the labels in this screen.
Table 54 Network > WAN > Internet Connection: PPPoE Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Retype to
Confirm
MTU Size
Nailed-Up
Connection
Idle Timeout
(sec)
WAN IP Address Assignment
Get automatically
from ISP
122
DESCRIPTION
Select PPP over Ethernet if you connect to your Internet via dial-up.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Type your password again to make sure that you have entered is correctly.
Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your
Router can receive and process.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in minutes that elapses before the router automatically
disconnects from the PPPoE server.
Select this option If your ISP did not assign you a fixed IP address. This is the default
selection.
NBG-419N v2 User's Guide