Viewing The Fast Fact Diagnostic Screens - Motorola DSR-6100 Operator's Manual

8

Viewing the Fast Fact Diagnostic Screens

NOTE: To move
between these two
screens, use the
4
buttons.
Figure 8-1: Fast Fact Diagnostic Screens
76
The diagnostic screens (Figure 8-1) are available via the On-Screen Display (OSD)
video out using a video monitor connected to the OSD Video Out port on the back
of the unit.
To view the OSD diagnostic screens, press the  buttons on the front of the unit
until the Diagnostic menu appears, and press the ENTER button to access the
Diagnostic menu on the unit.
DIAGNOSTIC
E
Press the 4 button to navigate to the Menus field and press the ENTER button to
move into the field.
DIAGNOSTIC
E
Use the  buttons to choose one of the Fast Fact Diagnostic screens.
Note: Pressing the ENTER button while viewing a particular OSD diagnostic
screen allows for the continued display of the OSD diagnostic information while
allowing the user to navigate thru other front-panel menus.
FF1
Fast Facts 1 (General Information) [page 77]
FF2
Fast Facts 2 (RF Port Configuration) [page 79]
FF3
Fast Facts 3 (Video Information) [page 80]
FF4
Fast Facts 4 (Audio1 and 2 Information) [page 82]
FF5
Fast Facts 5 (10/100 Ethernet Port Information) [page 83]
FF5
Fast Facts 5 (GigE Port Information) [page 84]
MENUS
Off
MENUS Clear Cntrs
Diag E No