Status5 Menu; Sync Field; Eb/No Field; Authorize State Field - Motorola DSR-4550 Operator's Manual

Status5 Menu

Sync Field

Read-only

Eb/No Field

Read-only

Authorize State Field

Read-only
DSR-4550
Note: This menu is not displayed when the active signal is received from a source
other than the L-band input connector.
Press the  buttons until the Status5 menu appears (shown below). This screen
displays the sync status, Eb/No (signal to noise ration) and authorization state of
the DSR-4550.
STATUS5 Sync
E
This field displays the acquisition Sync state. The Sync state for the active L-band
signal is either Paused, Tuning, or Locked. The unit presents Paused for sync state
0-2, Tuning for sync state 3-4, and Locked for sync state 5-9. Three dashes (---)
indicate that no information is available.
This field displays the Signal to Noise Ration (Eb/No (for the active L-band signal.
Three dashes (---) indicate that no information is available
This field displays the authorization state (either Authorized or Not Authorized). If the
Authorization State is shown as Not Authorized, the field alternately flashes and
displays the reason why it is not authorized (i.e., Missing Map, Undefined Channel,
Undefined Service, Not In Sync, No Program Rekey, No Working Key, No Event
Blackout, No Category Key, Old Category Seq, Subscrb With Tape, Subscrb w/o Tape,
Bad Seed Chksum, Bad Debit Chksum, Not Subscribed, Regional Blackout, or Circular
Blackout.
Three dashes (---) indicate that no information is available.
Eb/No Authorize State
Tuning -2.0 ---
Operating the DSR-4550
53