Sync Field; Eb/No Field; Authorize State Field - Motorola DSR-6100 Operator's Manual

3

Sync Field

Eb/No Field

Authorize State Field

58
This status-only field displays the acquisition Sync state. The Sync state can be
either Locked or Tuning.
This status-only field displays a value from 0.0 to 35.0 that designates a
measurement of the signal-to-noise ratio.
This status-only field displays the authorization state of the currently-selected channel.
This field indicates how the Satellite Multiplex Decrypter is authorized. If the
Authorization State is Not Authorized, the field will alternate, and display a reason why
it is not authorized (e.g., Missing Map). Table 3-3 describes each authorization state.
Table 3-3: Authorization States
Authorize State
Missing Map
Undefined Channel
Undefined Service
Unencrypted
Unknown
No Program Rekey
No Working Key
No Event Blackout
No Category Key
Old Category Seq
Subscrb With Tape
Subscrb w/o Tape
Bad Seed Chksum
Not Subscribed
Regional Blackout
Event Blackout
Circular Blackout
Incorrect Virtual Channel Table Number
Incorrect Virtual Channel Number
Incorrect Service Number
Service is not Encrypted
Unknown State
Program Rekey Message is Missing
Working Key Epoch Message is Missing
Event Blackout Message is Missing
Missing Category Key is Missing
Old Category Sequence in Program Rekey Message
Subscribed With Taping
Subscribed Without Taping
Bad Seed Checksum
Not Subscribed
Regional Blackout
Event Blackout
Circular Blackout
Description