Warnings - Canon PIXMA MP510 Service Manual

The value exceeds the number of copies
you can print.
Memory card is not set. Insert the card
after checking the direction.
DPOF information is not saved in the
memory card.
The number of copies to print is not set.
Input the number of copies.
This layout is available only for A4 or
8.5"x11"(215x279).
Settings cannot be changed when
printing stickers.
Change the setting after removing the
card.
The card is currently write-enabled. Set
to read-only mode before performing
operation.
The paper size is not correct. Check the
page size you have set.
Failed to scan Photo Index Sheet. Check
the orientation, position and marking.
<See manual>

2-4. Warnings

Warning
Low ink
Restrictions on paper
USB cable not connected
Cancellation of image
select information
During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999.
No memory card is inserted in the slot.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory card.
Multi-photo print was attempted without
specifying the print quantity (with the print
quantity left "0" (zero)).
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or LTR size paper is
selected, but the paper size is not set to A4 or
LTR.
With Sticker print selected, the Settings button
was pressed.
With a memory card inserted in the slot, change
of the Read/Write attribute was attempted.
With the memory card set to the Read/write
mode, Card Direct printing operation was
attempted from the menu.
Non-supported size of paper for PictBridge
Camera Direct printing is selected.
The machine failed in scanning the Photo Index
Sheet.
Message on the LCD
The following ink is low. Continue?
(Icon of each ink tank)
Yes No
In Camera Direct Printing, only "Yes" can be selected.
The current paper cannot be set. Change the size and
type.
Connect USB cable and turn on the PC.
Reset the selected photo information?
Yes No
- If images are edited on the computer, print
them from the computer.
A temporary error. After the error message is
displayed for a while, the last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Set a memory card.
A temporary error. The error message is
displayed for a while, then the LCD
automatically returns to the display before the
error occurrence.
A temporary error. The error message is
displayed for a while, then disappears. Specify
the print quantity.
A temporary error. The error message is
displayed for a while, then the LCD
automatically returns to the display before the
error occurrence.
A temporary error. The error message is
displayed for a while, then the LCD
automatically returns to the display before the
error occurrence.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
A temporary error. Remove the memory card,
change the memory card setting to Read-only,
then perform Card Direct printing.
Cancel printing on the digital camera. Check the
paper size, then print again.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index Sheet.
- Place the sheet in the correct orientation and
position.
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the LCD.
- Select No, and press the OK button.
=> Printing is cancelled, and the LCD returns to the
display immediately before printing was
attempted.
Re-select the supported paper type and size.
Connect the USB cable, then turn on the computer.
When one or more images are selected in Layout print,
and if a user tries to display the menu or sub-menu, the
message is displayed.
- Select Yes, and press the OK button.
=> The image selection is cancelled, and the menu
or sub-menu is displayed.
- Select No, and press the OK button.
=> The LCD returns to the display immediately
before the message was displayed.
1-7
Solution