If the print head has not
been capped before
(All in sequence)
*1: When 24 to 60 hours have elapsed since the previous Black cleaning, timer cleaning - 0 is performed. However, this
cleaning will be conducted up to 5 times from the machine installation, and no further timer cleaning - 0 will be performed.
*2: The period of time since the previous cleaning is counted by Black and Color separately. For this reason, the cleaning mode
may differ according to Black or Color.
*3: When only the black ink tank is replaced, Black cleaning is performed. One of the color ink tanks is replaced, Color
cleaning is performed. Both the black and color ink tanks are replaced, All-at-the-same-time cleaning is performed.
To the table of contents
<Part 2: 2. CLEANING MODE AND AMOUNT OF INK PURGED>
81 (All in sequence)
To the top