Download  Print this page

Advertisement

6 times
Green (Power)
7 to 9 times
Orange at odd
numbers (Alarm)
Green at even
numbers (Power)
10 times
Green (Power)
11 times
Orange (Alarm)
12 times
Green (Power)
13 times
Orange (Alarm)
14 times or
Green (Power)
more
Note: - If the Stop/Reset button is pressed 14 or more times, the Alarm LED (orange) or Power LED (green) lights steadily without
any changes.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the
table below, and press the ON/OFF button.
Time(s)
LED indication
0 times
1 time
Orange (Alarm)
2 times
3 times
Orange (Alarm)
4 times
5 times
Orange (Alarm)
6 times
7 times
Orange (Alarm)
8 times
9 times or more
Orange (Alarm)
Note: Confirm the model name and destination in service test print or EEPROM information print.
<Ink absorber counter resetting procedures>
After replacement of the ink absorber, reset the applicable ink absorber counter.
1) Before replacement of the ink absorber, check the ink absorber counter value in EEPROM information print.
Items, (2) EEPROM information print.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the replaced ink
absorber to set its counter to 0%, or 60% (for partial replacement).
Time(s)
0 times
Main ink absorber
1 time
Borderless-print ink absorber
2 times
Both the main and borderless-print ink absorbers
3 times
A half portion of the main ink absorber (partial replacement) Set to 60%
Print head deep cleaning
Return to the menu selection
Eject roller correction
Return to the menu selection
Button and LCD test
Ink absorber counter setting See
Return to the menu selection
Green (Power)
No change of the destination
Japan
Green (Power)
Korea
US
Green (Power)
Europe
Australia
Green (Power)
Asia
China
Green (Power)
Taiwan
Return to the menu selection
Replaced ink absorber
See
"Destination settings
Cleaning of both Black and Color
 
Not used in servicing.
 
See
"Button and LCD test
"Ink absorber counter setting
Destination
Reset to 0%
Reset to 0%
Reset to 0%
1-28
procedures" below.
procedures" below.
procedures" below.
See 3-4. Verification
Counter value

Advertisement

Table of Contents

   Related Manuals for Canon PIXMA MP510

Comments to this Manuals

Symbols: 0
Latest comments: