Download Print this page

Canon PIXMA MP510 Quick Start Manual

Photo all-in-one printer.
Hide thumbs

Advertisement

Photo All-in-One
Quick Start Guide

Advertisement

Chapters

   Related Manuals for Canon PIXMA MP510

   Summary of Contents for Canon PIXMA MP510

  • Page 1: Quick Start Guide

    Photo All-in-One Quick Start Guide...

  • Page 2

    Telephone Device for the Deaf (TDD) support is available at (1-866-251-3752). 4. Extended Service and Support Canon CarePAK Extended Service Plan is a cost-attractive and easy-to-use extended service program that provides up to three full years of service and support coverage at a very attractive price.

  • Page 3

    Photo All-in-One Quick Start Guide...

  • Page 4

    Canon PIXMA MP510 Photo All-in-One Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc.

  • Page 5: Table Of Contents

    Table of Contents Before Printing...2 Turning the Machine On and Off ...2 Handling the Original Document...4 Loading Printing Paper ...6 Changing the Print Settings ...17 Printing from Your Computer...22 Printing with Windows...22 Printing with Macintosh...23 Scanning Images ...24 Scanning Methods ...24 Copying ...25 Making Copies ...25 Using Other Copy Functions...25...

  • Page 6: Before Printing

    Before Printing Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. The Print Head and ink tanks are set into place. If you are using the machine connected to a computer, confirm also the following. The machine is connected to your computer (or a compatible device).

  • Page 7: Turning Off The Machine

    Turning off the Machine To turn off the machine, press the ON/OFF button. When the POWER lamp stops flashing, the machine is turned off. Important About the Power Plug When removing the power plug after turing off the machine, be sure to confirm that the POWER lamp is not lit.

  • Page 8: Handling The Original Document

    Handling the Original Document This section describes how to load the original document on the Platen Glass. Original Document Requirements The original documents you load on the Platen Glass for copying or scanning must meet these requirements: Document Paper documents type Photographs Books...

  • Page 9

    Important Do not place any objects weighing more than 4.4 lb / 2 kg on the Platen Glass. Do not press or put weight on the original with pressure exceeding 4.4 lb / 2 kg. Doing so may cause the scanner to malfunction or the Platen Glass to break.

  • Page 10: Loading Printing Paper

    Loading Printing Paper This section describes how to load printing paper in the Auto Sheet Feeder and the Front Feeder. Paper Handling Recommended Paper and Requirements Media Type Paper Support Load Limit Model Auto Sheet Feeder Plain Paper — 0.52 inches / 13 mm Envelopes —...

  • Page 11: Media Types You Cannot Use

    Folded, curled, or wrinkled paper Damp paper Paper that is too thin (weighing less than 64 gsm / 17 lb) Paper that is too thick (non-Canon genuine paper weighing more than 105 gsm / 28 lb) Picture postcards Front Feeder...

  • Page 12: Using Specialty Media

    Note that some types of clear plastic folders and albums may cause the edges of the paper to turn yellow. Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. Photo Quality Media Glossy Photo Paper...

  • Page 13

    Using the Auto Sheet Feeder and the Front Feeder This machine offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the machine, and the Front Feeder, found at the front of the machine. Note You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder.

  • Page 14

    To Change the Paper Source The Auto Sheet Feeder lamp lights up when feeding from the Auto Sheet Feeder, and the Front Feeder lamp lights up when feeding from the Front Feeder. Before you print, make sure that the paper source selection matches the paper source where you actually loaded paper.

  • Page 15: Changing The Paper Source

    Changing the Paper Source Before printing, confirm that the location where you have loaded paper is selected as the paper source. Press the Paper Feed Switch to change the paper source. Important When Printing from Your Computer If Paper Feed Switch is not selected for Paper Source in the printer driver, the Paper Feed Switch on the machine will be disabled when printing.

  • Page 16: Loading Paper

    Note For details on the specialty media Canon provides for use with its various printers, refer to “Printing Media” in the User’s Guide on-screen manual. For detailed instructions on how to load specialty media into the machine, refer to “Printing Media”...

  • Page 17: Loading Paper In The Auto Sheet Feeder

    Loading Paper in the Auto Sheet Feeder Flatten the four corners of the paper before loading it. Note Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams. If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat.

  • Page 18

    23. Loading Paper in the Front Feeder You can load A4, Letter, or B5-sized plain paper (such as Canon Super White Paper SW-201) in the Front Feeder. You cannot load any other paper in the Front Feeder. Flatten the four corners of the paper before loading it.

  • Page 19

    Load the paper with the print side facing DOWN. (1) Load the paper in the Front Feeder with the print side facing DOWN and the leading edge to the far side. (2) Align the paper stack against the right edge of the Front Feeder.

  • Page 20: Loading Envelopes

    Loading Envelopes Envelopes must be fed from the Auto Sheet Feeder. Use either European DL or US Comm. Env. #10-sized envelope. Important You need to print from the computer to print on envelopes. Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or sticker flaps.

  • Page 21: Changing The Print Settings

    Changing the Print Settings This section describes the Settings screen that can be specified on the Operation Panel when copying or when printing from a memory card. To Change the Print Settings You can change the print settings such as page size, media type, bordered or borderless print, etc.

  • Page 22: Copy Mode

    Change the setting. (1) Use the [ or ] button to change the setting. Example: Change to 4" x 6" (101 x 152) here. Complete setting. (1) Press the Settings button. The LCD returns to the Settings screen. Print Setting Items Each tab contains the following setting items.

  • Page 23: Memory Card Mode

    (3) Adjust image quality according to the original. Fast, Standard, High Note Fast can be selected when Plain paper is selected as the media type. If you used Fast with media type set to Plain paper and the quality is not as good as expected, select Standard or High and try copying again.

  • Page 24

    (1) Select the page size. 8.5" x 11" (215 x 279), A4, 4" x 6" (101 x 152), 5" x 7" (127 x 177), Credit card Important You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder. When specifying a page size other than A4 or 8.5"...

  • Page 25

    (4) Activate/deactivate Face brightener function. Brightens a darkened face on the photo taken against the light. Face brightener ON, Face brightener OFF (5) Activate/deactivate Image optimizer function. Corrects and smooths the jagged contours for printing. Image optimizer ON, Image optimizer OFF (6) Adjust brightness.

  • Page 26: Printing From Your Computer

    Create a document or open a file to print using an appropriate application software. Select Print on the application software’s File menu. Make sure that Canon MP510 Printer is selected, and click Preferences (or Properties). Specify the required settings and click OK.

  • Page 27: Printing With Macintosh

    Printing with Macintosh Turn on the machine and load the paper in the machine. See “Turning the Machine On and Off” on page 2 and “Loading Printing Paper” on page 6. Make sure that the proper paper source is selected. See “Changing the Paper Source”...

  • Page 28: Scanning Images

    Scanning Images You can scan images from the machine to a computer without printing them and save them in popular file formats, such as JPEG, TIFF, bitmaps, or PDF. If you are scanning printed text, you can use the OCR (Optical Character Recognition) software to convert it to text data. Scanning Methods Scanning Using the MP Navigator Using MP Navigator, you can scan originals loaded on the Platen Glass and view images saved...

  • Page 29: Copying

    Reduced/Enlarged Copy Reduces or enlarges copies. Sticker Copy Makes stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canon sticker paper. Borderless Copy Copies color images so that they fill the entire page without borders.

  • Page 30: Printing From A Memory Card

    Printing from a Memory Card Memory Cards Supported by This Machine The following memory cards are compatible with this machine. Memory cards that can be directly inserted into the Card Slot: Memory cards that can be inserted in the Card Slot using the adapter: *1 Requires purchase of a separate compact flash card adapter for xD-Picture cards.

  • Page 31: Inserting The Memory Card

    Inserting the Memory Card Turn on the machine. See “Turning the Machine On and Off” on page 2. Open the Card Slot Cover. Insert one and only one memory card into the Card Slot. Card Type Compact Flash (CF) card Microdrive xD-Picture card* SmartMedia...

  • Page 32: Removing The Memory Card

    Prints specifying the number of copies to print for each photo. Layout Print Prints photos your pasted in the specified layout. Sticker Print Prints your favorite photo with a frame on Canon Photo Stickers. Print all photos Prints all photos saved on the memory card. Printing from a Memory Card...

  • Page 33: Printing Using The Photo Index Sheet

    Photo index print Prints an index of all the photos saved on a memory card. DPOF print Prints according to the Digital Print Order Format (DPOF) settings on your digital camera, if you have specified them. Printing Using the Photo Index Sheet Turn on the machine, and load A4 or Letter-sized paper.

  • Page 34: Printing Photographs Directly From A Compliant Device

    Printing Photographs Directly from a Compliant Device Printing from a PictBridge Compliant Device You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone and print recorded images directly without using a computer. Note PictBridge is an industry standard enabling a range of digital photo solutions, including the direct printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a computer.

  • Page 35: Printing Photographs Directly From A Pictbridge Compliant Device

    Default setting explained below is applied for the setting item. * In the following description, names of settings items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.

  • Page 36

    For details on this setting, refer to the User’s Guide on-screen manual. If you are using a Canon-brand PictBridge compatible device, additional options of VIVID, NR, VIVID+NR, or Face may be available, depending on the model.

  • Page 37

    Date/File No. Print Setting You cannot change this setting on this machine. The setting on the PictBridge compliant device is applied. If the images already have dates superimposed when shot, set this PictBridge setting item to Off. If you select Date, File No., or Both, the date and/or file number will be printed over the date printed by the camera’s function.

  • Page 38: Routine Maintenance

    Routine Maintenance Replacing an Ink Tank When ink runs out, replace the ink tank. The machine will not print if the wrong type of ink tank is used, or if it is installed in the incorrect position. The machine uses the following ink tanks. Black: PGI-5BK Cyan: CLI-8C Note...

  • Page 39: Knowing When To Replace Ink Tank

    * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

  • Page 40: Replacing Ink Tanks

    Important Handling Ink To maintain optimal printing quality, we recommend the use of specified Canon brand ink tanks. Refilling ink is not recommended. Once you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.

  • Page 41

    Prepare the replacement tank. (1) Remove the new ink tank from its packaging, then pull the orange tape in the direction of the arrow (A) so that the protective film does not remain on the air hole (B). Then remove the film completely (C).

  • Page 42

    Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. (2) Press on the the ink tank snaps firmly into place. (3) Make sure that the ink tank lamp lights up red. Important The machine cannot be used unless all the ink tanks are installed.

  • Page 43: Keeping The Best Printing Results

    Keeping the Best Printing Results To avoid drying of the Print Head and clogging of the nozzles, note the following. When You Turn Off the Machine Follow the procedure below to turn off the machine. (1) Press the ON/OFF button to turn off the machine. (2) Confirm that the POWER lamp has gone out.

  • Page 44: When Printing Becomes Faint Or Colors Are Incorrect

    See “Print Head Deep Cleaning” on page 46. Note If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your Canon service representative. If the Ruled Lines Are Shifted Step 1 Routine Maintenance See “Aligning the Print Head”...

  • Page 45: Printing The Nozzle Check Pattern

    Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head. Make sure that the machine is turned on, open the Front Feeder, and extend the Output Paper Support. Load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder or the Front Feeder.

  • Page 46: Examining The Nozzle Check Pattern

    Examining the Nozzle Check Pattern Follow the procedure below to examine the nozzle check pattern, and perform cleaning if necessary. Note If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. See “Replacing an Ink Tank”...

  • Page 47

    If Lines Are Missing or White Streaks Are Present (1) Select Also B and press the OK button. The cleaning confirmation screen is displayed. (2) Select Yes and press the OK button to start Print Head Cleaning. See “Print Head Cleaning” on page 44. Routine Maintenance...

  • Page 48: Print Head Cleaning

    Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.

  • Page 49

    Note If the problem is not resolved after performing steps 4 and 5 twice, try Print Head Deep Cleaning. See “Print Head Deep Cleaning” on page 46. Routine Maintenance...

  • Page 50: Print Head Deep Cleaning

    Print Head Deep Cleaning If print quality does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary.

  • Page 51

    (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative. Routine Maintenance...

  • Page 52: Aligning The Print Head

    Aligning the Print Head If ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head position. Automatic Print Head Alignment Make sure that the machine is turned on, open the Front Feeder, and extend the Output Paper Support.

  • Page 53: Manual Print Head Alignment

    Adjust the print head position. (1) For each row in the Print Head Alignment Sheet (A, B, C, etc.), select the pattern that has the least noticeable streaks, and fill in the corresponding circle ( or a black ink pen. (2) Load the Print Head Alignment Sheet on the Platen Glass.

  • Page 54

    Print the Print Head Alignment Sheet. (1) Press the Menu button. (2) Use the [ or ] button to select Maintenance/settings, then press the OK button. The Maintenance/settings screen is displayed. (3) Use the [ or ] button to select Maintenance, then press the OK button. The Maintenance screen is displayed.

  • Page 55

    Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks. (A) Less noticeable white streaks (B) More noticeable white streaks (4) Check the printed patterns and use the [ or ] button to input the number of the pattern in column L that has the least noticeable horizontal streaks.

  • Page 56: Cleaning Your Machine

    Cleaning Your Machine This section describes the cleaning procedure that is needed to maintain your machine. Caution Be sure to turn off the power and disconnect the power cord before cleaning the machine. Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine threads may remain inside the machine and cause problems such as a blocked Print Head and poor printing results.

  • Page 57

    Repeat step 3 three times. The paper cleans the Paper Feed Rollers as it feeds through the machine. If there are no signs of improvement after performing cleaning three times, contact a Canon service representative. Cleaning the Paper Feed Roller of the Front Feeder Turn off the machine.

  • Page 58: Cleaning The Inside Of The Machine (bottom Plate Cleaning)

    Hold the Rear Cover Lever and then press to the right and pull to remove the Rear Cover. Manually rotate the paper feed roller toward you and apply a cotton swab or the like to wipe off dust or stain. (A) Do not touch these.

  • Page 59: Cleaning The Protrusions Inside The Machine

    Load this and only this sheet of paper in the Auto Sheet Feeder with the open side to the front. Set the Paper Thickness Lever to the left. Perform bottom plate cleaning. (1) Press the Menu button. (2) Use the [ or ] button to select Maintenance/settings, then press the OK button. The Maintenance/settings screen is displayed.

  • Page 60: Troubleshooting

    Troubleshooting This section describes troubleshooting tips for problems you may encounter when using the machine. Note If you cannot find appropriate tips for your problem, refer to the on-screen manuals. “Error Message Is Displayed on the LCD” on page 57 “LCD Cannot Be Seen At All or Is Hard to See”...

  • Page 61: Error Message Is Displayed On The Lcd

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

  • Page 62

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.

  • Page 63: Lcd Cannot Be Seen At All Or Is Hard To See

    LCD Cannot Be Seen At All or Is Hard to See Cause The display on the LCD is hard to see. Cannot see the display on the LCD. An Unintended Language Is Displayed on the LCD Cause The language you want to be displayed is not selected.

  • Page 64: Cannot Install The Mp Drivers

    Double-click the CD-ROM icon on your desktop to start installation. If the CD-ROM icon is not displayed on the desktop, there may be a problem with the CD-ROM. Contact a Canon service representative. Follow the procedure described in the Easy Setup Instructions for proper installation.

  • Page 65: Cannot Connect To Computer Properly

    If the CD-ROM icon is not displayed, restart your computer. If the icon is still not displayed, try different disks and see if they are displayed. If other disks are displayed, there is a problem with the Setup CD-ROM. Contact a Canon service representative.

  • Page 66: Print Results Not Satisfactory

    Print Results Not Satisfactory Cannot Print to End of Job Cause Size of the print data is extremely large (Windows XP/Windows 2000 only). Part of the Page Is Not Printed Cause Page Size setting in the Operation Panel does not match the actual size of the paper loaded in the machine.

  • Page 67: Ink Does Not Come Out/printing Does Not Start/printing Is Blurred/colors Are Wrong/straight Lines Are Misaligned

    If the problem is still not resolved after performing Print Head Deep Cleaning twice The Print Head may be damaged. Contact your Canon service representative. For details on how to print the nozzle check pattern, how to clean the Print Head, and how to perform Print Head Deep Cleaning, see “When Printing...

  • Page 68: White Streaks

    Action When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Pro or other Canon specialty paper. See “Media Types You Cannot Use” on page 7. Check that the Media Type set in the Operation Panel (when performing wireless printing, the Media Type setting in Wireless print settings) matches the type of the loaded printing paper.

  • Page 69

    Cause Printing on inappropriate type of paper. Paper is curled. Inappropriate Paper Thickness Lever setting. Media Type setting in the Operation Panel does not match the actual type of paper. Printing graphics with Intensity setting set too high. Printing beyond the recommended printing area.

  • Page 70: Colors Are Uneven Or Streaked

    Colors Are Uneven or Streaked Cause Print quality is not set appropriately. Printing Problems When Copying Cause The original document is not loaded correctly. The print quality setting is not suitable for the original. The original document is not loaded with the side to be copied faced down.

  • Page 71: Printing Does Not Start

    Printing Does Not Start Cause The machine is not powered on./The power cord is not connected. Ink tank is empty. Ink tank not installed in proper position. Open the Scanning Unit (Printer Cover) and check the ink lamps. Ink tank is not installed securely. / Part of the orange tape is remaining.

  • Page 72: Paper Does Not Feed Properly

    Cause Unnecessary print jobs are left in queue. / Computer problems. Paper Does Not Feed Properly Cause Printing on inappropriate type of paper. Paper Feed Rollers are dirty. Paper not loaded properly. Troubleshooting Action Restarting your computer may solve the problem. If there are any unnecessary print jobs, follow the procedure below to delete them.

  • Page 73

    Cause Paper source selection is inappropriate. Too much plain paper loaded. Foreign object in the Auto Sheet Feeder or Front Feeder. Envelopes not prepared or loaded properly. Rear Cover is not attached properly. Action You cannot load paper other than A4, Letter, or B5-sized plain paper in the Front Feeder.

  • Page 74: Paper Jams

    If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Do not load credit card-sized paper in the landscape orientation.

  • Page 75

    68 to confirm that you are using the correct paper and are loading it in the machine correctly. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting...

  • Page 76: Error Message Appears On The Screen

    (3)Open the File menu and select Properties. (4)Click the Ports tab to confirm the port settings. Make sure that a port named USBnnn (Canon MP510 Printer) (where n is a number) is selected for Print to the following port(s). In Windows Me or Windows 98, click the Details tab and make sure that MPUSBPRNnn (Canon MP510 Printer) is selected for Print to the following port.

  • Page 77: Error No.: 300 Is Displayed

    However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need to replace a particular part of the machine.)

  • Page 78: Cannot Print Properly From A Digital Camera

    If you are using a non-Canon PictBridge compatible camera and not sure how to dismiss the printer error message from the camera, check the error message displayed on the LCD and dismiss the error message. For details on dismissing an error message from the machine, see “Error Message Is Displayed on the LCD”...

  • Page 79

    5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink tanks.

  • Page 80: Cannot Print Properly From A Photo Index Sheet

    Cannot Print Properly from a Photo Index Sheet Cause “Failed to scan Photo Index Sheet.” is displayed. Troubleshooting Action Make sure the Photo Index Sheet is set in the correct position and orientation on the Platen Glass. Make sure the Platen Glass and the Photo Index Sheet are not dirty. Make sure all required circles on the Photo Index Sheet are filled in.

  • Page 81: Appendix

    You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the MP510 On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs) > Canon MP510 Manual > MP510 On- screen Manual.

  • Page 82: Specifications

    Specifications Printing resolution (dpi) Print speed * * Based on Canon standard pattern. Print speed may vary depending on system configuration, software, document complexity, print mode and page coverage. Print width Acoustic noise level Operating environment Storage environment Power supply...

  • Page 83

    Glossy Photo Paper, Glossy Photo Paper “Everyday Use”, Plain Paper) Credit card / 5.4 x 8.6 cm (Glossy Photo Paper Card Size) *1 Canon-brand sticker. Printing on this paper is available only when the Layout function on your camera has a 16-up option. See “Recommended Paper and Requirements”...

  • Page 84

    Interface Operating System USB 2.0 Hi-Speed Windows XP SP1, SP2 Windows 2000 Professional SP4 Windows XP SP1, SP2 Windows 2000 Professional SP2, SP3, Windows Millennium Edition Windows 98 Interface Operating System USB 2.0 Hi-Speed Mac OS X v.10.4 Mac OS X v.10.2.8 - v.10.3 *1 Conform to the operating system’s requirement when it is higher than this.

  • Page 85: Menu Items

    Menu Items When you press the Menu button, the Settings button, or the Photo Index Sheet button, the Menu will be displayed on the LCD. Use the menu items to specify various settings of the machines’s functions and to perform machine maintenance.

  • Page 86

    Memory Card Mode Menu button Single-photo print Multi-photo print Special photo print Layout print Sticker print Print all photos Photo Index print DPOF print Maintenance/settings Settings button Page size Media type Print quality Bordered/Borderless Date/file no. Vivid photo Photo optimizer pro Noise reduction Face brightener Image optimizer...

  • Page 87: Safety Precautions

    Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. Warning You may cause an electric shock, fire, or damage the machine if you ignore any of these safety precautions.

  • Page 88

    Maintaining the Do not attempt to disassemble or modify the machine. There are no user serviceable parts inside machine the machine. The machine contains high-voltage components. Never attempt any maintenance procedure not described in this guide. Working around the Do not use highly flammable sprays near the machine. machine This could cause a fire or electric shock if the spray comes into contact with electrical components inside the machine.

  • Page 89

    Working around the Never put your hands or fingers in the machine while it is printing. machine Do not place any object on the machine. Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the machine.

  • Page 90: Legal Limitations On Use Of Your Product And Use Of Images

    Legal Limitations on Use of Your Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.

  • Page 91: Users In The U.s.a

    1-516-328-5600 Canon U.S.A., INC. LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. ("Canon USA") with respect to the new or refurbished Canon-brand product ("Product") packaged with this limited warranty, when purchased and used in the United States only.

  • Page 92

    Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed.

  • Page 93

    Toll-free live technical support Monday-Saturday (excluding holidays) at 1-800-828-4040 Telephone Device for the Deaf (TDD-1-866-251-3752) Repair or Exchange Service Options: In the event service is required for the Product during the limited warranty period, Canon USA offers two hardware support options: Authorized Service Facility Carry-In / Mail-In Service Canon USA's Carry-In/Mail-In Service provides repair or exchange, at Canon USA's option, through Canon USA's Authorized Service Facility (ASF) network.

  • Page 94

    ** InstantExchange warranty service is subject to the availability of refurbished or new replacement units. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 ©2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered trademark in other countries. Safety Precautions...

  • Page 95: Index

    Specifications copy 79 general 78 PictBridge 79 scan 79 System Requirements 80 Troubleshooting 56 paper jams 70 Turning off the Machine 3 Turning on the Machine 2 Users in the U.S.A. Canon U.S.A., Inc. Limited Warranty - U.S. Only Index...

  • Page 96

    This product uses the following copyrighted software: exit.c Copyright © 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.

  • Page 97: Ink Tanks

    © 2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may be a registered trademark or trademarks in other countries. All other product and brand names are trademarks of their respective owners. As an ENERGY STAR Canon U.S.A., Inc.

  • Page 98

    The following ink tanks are compatible with this product. QT5-0454-V02 XXXXXXXX ©CANON INC.2006 PRINTED IN VIETNAM...

Comments to this Manuals

Symbols: 0
Latest comments: