Download  Print this page

Advertisement

3-4. Verification Items

(1) Service test print
<EEPROM information contents>
On the service test print (sample below), confirm the EEPROM information as shown below. (The information is printed in the top and
middle areas of the printout.)
- Top area:
MP510: Model name
M = x.xx: ROM version
D = xxx.x: Main ink absorber counter value (%)
USB (xxxxxx): USB serial number
- Below the solid print patterns in each color:
JPN: Destination
- Middle area:
FA = xx xx xx, Temp: Reserved for plant use
AB (C = OK M = ...): Ink system function check result
<Print check items>
On the service test print (sample below), confirm the following items:
- Check 1, top of form accuracy: The lines shall not extend off the paper.
- Check 2, EEPROM information
- Check 3, nozzle check pattern: Ink shall be ejected from all nozzles.
- Check 4, check pattern for uneven printing due to carriage movement or line feeding (standard mode): There shall be no
remarkable unevenness.
- Check 5, check pattern for uneven printing due to carriage movement or line feeding (highest print quality mode): There shall
be no remarkable unevenness.
- Check 6, automatic print head alignment sensor correction: The results shall be OK.
1-31

Advertisement

Table of Contents

   Related Manuals for Canon PIXMA MP510

Comments to this Manuals

Symbols: 0
Latest comments: