Download  Print this page

Advertisement

(9) Service mode
Function
Service test print
- Model name
- Destination
- ROM version
- USB serial number
- Ink absorber counter value
(ink amount in the ink
absorber)
- Ink system function check
result
EEPROM information print
- Model name
- Destination
- ROM version
- Ink absorber counter value
(ink amount in the ink
absorber)
- Print information
- Error information, etc.
EEPROM initialization
Ink absorber counter reset
Destination settings

Button and LCD test

Ink absorber counter setting
<Service mode operation procedures>
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the
buttons). The Power LED lights in green to indicate that a function is selectable.
2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons.
(Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green,
starting with Alarm LED.)
4) When the Power LED lights in green (and "CANON Idle" is displayed on the LCD), press the Stop/Reset button the specified
number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset
button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Time(s)
LED indication
0 times
Green (Power)
1 time
Orange (Alarm)
2 times
Green (Power)
3 times
Orange (Alarm)
4 times
Green (Power)
5 times
Orange (Alarm)
Procedures
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
See "Service mode operation procedures"
below.
Function
Power off
Service test print
EEPROM information print
EEPROM initialization
Ink absorber counter
resetting
Destination settings
Set a sheet of A4 or letter size paper.
For print sample, see
Service test print, <Service test print sample>.
Set a sheet of A4 or letter size paper.
The following items are NOT initialized, and the
shipment arrival flag is not on:
- USB serial number
- Destination settings
- Ink absorber counter value (ink amount in the ink
absorber)
 
 
When the print head is not installed, the carriage
returns and locks in the home position capped.
See 3-4. Verification Items, (1) Service test print.
See 3-4. Verification Items, (2) EEPROM information
print.
 
See
"Ink absorber counter resetting
Press the Stop/Reset button the specified number of
time(s) according to the destination.
1-27
Remarks
3-4. Verification Items, (1)
Remarks
procedures" below.

Advertisement

Table of Contents

   Related Manuals for Canon PIXMA MP510

Comments to this Manuals

Symbols: 0
Latest comments: