Maintenance; Adjustment, Periodic Maintenance, Periodic Replacement Parts, And Replacement Consumables By Service Engineer - Canon PIXMA MP510 Service Manual

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement
Consumables by Service Engineer
(1) Adjustment
Adjustment
EEPROM
initialization
Destination settings
(EEPROM settings)
Ink absorber counter
resetting
(EEPROM settings)
Ink absorber counter
value setting
(EEPROM settings)
Paper feed motor
*1
position adjustment
Carriage rail position
adjustment
Print head alignment
Grease application
Ink system function
check
LCD language
settings
Document pressure
sheet position
adjustment
*1: The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
*2: Automatic print head alignment using the print head alignment sheet (via the operation panel only).
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
Timing
At logic board replacement
At logic board replacement
- At logic board replacement
- At ink absorber replacement
- At logic board replacement
At paper feed motor replacement
- At carriage unit replacement
- After carriage rail removal and
re-assembly
- At print head replacement
- At logic board replacement
- When print quality is not
satisfying
- At carriage unit or carriage rail
replacement
- At LF earth spring or paper
feed roller replacement
- At platen replacement
- At logic board replacement
- At spur base unit replacement
- At carriage unit replacement
At logic board replacement
- At document pressure sheet
replacement
- At document pressure plate
ass'y replacement
Purpose
To initialize settings.
To set the destination.
To reset the ink absorber counter.
To set the ink amount data in the ink
absorber to the ink absorber counter.
To adjust the belt tension. (Position the
paper feed motor so that the belt is
stretched tight.)
To adjust the distance between the print
head and paper (between the carriage
and the platen).
To secure the dot placement accuracy.
To maintain sliding properties of the
following items:
- Carriage unit
- LF earth spring
- Eject roller
To maintain detection functionality for
presence of the ink tanks and each ink
tank position.
To set the language to be displayed on
the LCD.
To adjust the pressure sheet to fit in
place to the reference mark in the left
back.
1-1
Approx.
Tool
time
None. 1 min.
Perform in the
service mode.
None. 1 min.
Perform in the
service mode.
None. 1 min.
Perform in the
service mode.
None.
1 min.
Perform in the
service mode.
None. 5 min.
5 min.
None.
None. 3 min.
(manual,
*2
auto
1 min.
FLOIL KG-107A
IF-20
1 min.
None.
Perform in the
service mode.
None. 1 min.
Perform in the user
mode.
None. 1 min.
)