Fluke CombiScope PM3370B User Manual page 70

HOW TO USE THE INSTRUMENT
TIMEBASE
X POS
With X POS the displayed signal is shifted horizontally across the
display.
- Turn the X POS control clockwise.
1
Observe that a bar graph (
shows which part of the digital trace is displayed as expanded. This block on the
bar graph moves as you use the XPOS control.
- Press the RUN/STOP key.
Observe that the MAGNIFY key and the X POS control can still be used after the
acquisition has STOPped. This allows you to look at signal details even after the
signal has been acquired.
- Press the RUN/STOP key.
TRIGGERING
- Simultaneously press the STATUS and TEXT OFF keys.
- Press AUTOSET.
X POS
1
) is displayed.The block on the bar graph
4 - 25
X POS
MAT4199