Fluke CombiScope PM3370B User Manual page 215

FUNCTION REFERENCE
Key sequence:
MEASURE MEAS1(2)
on off
CURSOR
LIMIT&
STATIST
Remote commands:
CPL: QM (Command to query a measurement)
Refer to Chapter 6 for full details.
volt
time
delay
Toggle softkey to select time measurements in menu
MEAS1 or MEAS2.
TRACK
Control to choose the volt measurement.
Control to select the signal on which the measurement
must be done.
Toggle softkey to switch the measurement on and off.
CURSOR
LIMITED
yes no
Toggle softkey to switch cursor limited measurements
on and off.
STATIST
on off
Toggle softkey to switch the statist function on and off.
ST6780
9312
5 - 95