Fluke CombiScope PM3370B User Manual page 115

4 - 70 HOW TO USE THE INSTRUMENT
The preceding section describes the setup of a printer using the RS 232 interface.
If you wish to use an IEEE-488 equipped printer, all steps are the same, except
for the RS 232 setup.
9303
UTILITY PLOT SETUP
For a hard copy with a plotter, please refer to the previous section on how to set
up the oscilloscope to be used with a printer. Instead of selecting a printer, you
can select a plotter from the following models or emulations : HP7440, HP7550,
HP7475A, HP7470A, HPGL (= standard HPGL), PM8277 and PM8278.