Fluke CombiScope PM3370B User Manual page 232

THE CPL PROTOCOL
LOCAL LOCKOUT
Purpose:
This instruction will inhibit the Go to Local function of the STATUS/LOCAL key on
the frontpanel.
Once activated, the Local Lockout State is disabled by sending the Go to Local
(GL), the Reset Instrument (RI) command or by cycling power OFF and ON.
(Refer also to "Go to Remote" and "Go to Local").
There is no front panel equivalent for this command.
Command:
"LL"
Response:
acknowledge
Example:
100 PRINT #1,"LL"
110 GOSUB 1000
Local, Remote, Remote+Local Lockout States
power-on
Local State
CR
CR
:'Send Command
:'Sync on acknowledge
"Go to Remote"
"Go to Local"
"Reset Instrument"
<STATUS/LOCAL button>
"Go to Local"
"Reset Instrument"
Remote State
"Local Lockout"
Remote with
Local Lockout
State
6 - 15
LL