Table 89 Smt Menus Overview - ZyXEL Communications P-793H User Manual

Table 88 Main Menu Summary
MENU
21 Filter and Firewall
Setup
22 SNMP Configuration
23 System Password
24 System Maintenance
25 IP Routing Policy
Setup
26 Schedule Setup
99 Exit
The following table gives you an overview of the various SMT menus.

Table 89 SMT Menus Overview

MENUS
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Route Setup
15 NAT Setup
21 Filter and Firewall
Setup
22 SNMP Configuration
23 System Password
Chapter 21 Introducing the SMT
FUNCTION
Use this menu to configure filters and to activate or deactivate the firewall.
Use this menu to configure SNMP.
Use this menu to change your password.
Use this menu for comprehensive system maintenance, from looking at the
system status to uploading firmware. You can also access the Command
Interface (CI).
Use this menu to configure policy routes.
Use this menu to configure schedule sets.
Use this menu to exit the SMT.
SUB MENUS
1.1 Configure Dynamic DNS
2.1 Traffic Redirect Setup
2.2 Dial Backup Setup
3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP Setup
3.6 Port Based VLAN Setup
11.1 Remote Node Profile
12.1 IP Static Route Setup
12.3 Bridge Static Route Setup 12.3.1 Edit Bridge Static
15.1 Address Mapping Sets
15.2 NAT Server Sets
21.1 Filter Set Configuration
21.2 Firewall Setup
2.2.1 Advanced Dial Backup
Setup
3.2.1 IP Alias Setup
11.1.3 Remote Node Network
Layer Options
11.1.5 Remote Node Filter
11.1.6 Remote Node ATM
Layer Options
12.1.1 Edit IP Static Route
Route
15.1.x Address Mapping
Rules
15.2.x NAT Server Setup
21.1.x Filter Rules Summary
P-793H User's Guide
15.1.x.x Address
Mapping Rule
21.1.x.x Generic Filter
Rule
21.1.x.x TCP/IP Filter
Rule
247